تبلیغات
دانلود رایگان مقاله آی اس آی درخواستی( Free DOWNLOAD ISI Papers )،بانک و مرجع مقالات علمی و تخصصی، پروژه، دریافت و دانلود رایگان+مجلات و نشریات آی اس آی - Structural and mechanical properties of metallic–intermetallic laminate composites produced by explosive welding and annealing
 
دانلود رایگان مقاله آی اس آی درخواستی( Free DOWNLOAD ISI Papers )،بانک و مرجع مقالات علمی و تخصصی، پروژه، دریافت و دانلود رایگان+مجلات و نشریات آی اس آی
علم و گسترش آسان و ارزان و با کیفیت(هدف ما هموار کردن مسیر پژوهش) Easy, cheap and high quality science and development
درباره وبلاگ



مدیر وبلاگ : edy
--------------------------------

--------------------------------------------------------------
برای عضویت در "سیمرغ سعادت" و دریافت مطالب قرار گرفته در بلاگ از طریق ایمیل تان و اطلاع از بروزرسانی ، کافی است در خبر نامه زیر عضو گردید .





Powered by WebGozar



 
نویسندگان
نظرسنجی
در چه زمینه ای فعالیت را افزایش دهیم؟















 
>translator
Powered by Translate
>translator
 undefined 
Bookmark and Share
a b s t r a c t
Metallic–intermetallic laminate (MIL) composites are promising materials for the aerospace industry and other applications. In the current work, the results of studies regarding the ‘‘Al–Al3Ti–Ti’’ composite are presented. The composite was fabricated by explosive welding and annealing under an air atmosphere of
630 C. The time was varied from 1 to 100 h to study the intricacies of intermetallic layer growth. The structure was investigated by optical microscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The presence of thick oxide films, which may significantly reduce the rate of diffusion, was not found. The kinetics of intermetallic layer growth largely coincides with data from other authors. Nevertheless, some differences were found. In spite of the large annealing time (up to 100 h) the complete dissolution of 1-mm thick aluminum plates was not reached.
The results of tension tests and impact strength tests are briefly discussed.
دانلود


Structural and mechanical properties of metallic–intermetallic laminate composites produced by explosive welding and annealing






نوع مطلب : درباره مقالات ISI، درباره مقالات انگلیسی، مقالات ISI، مقالات انگلیسی، 
برچسب ها : a b s t r a c t Metallic–intermetallic laminate (MIL) composites are promising materials for the aerospace industry and other applications. In the current work، the results of studies regarding the ‘‘Al–Al3Ti–Ti’’ composite are presented. The composite was fabricated by explosive welding and annealing under an air atmosphere of 630 C. The time was varied from 1 to 100 h to study the intricacies of intermetallic layer growth. The structure was investigated by optical microscopy، transmission electron microscopy (TEM)، scanning electron microscopy (SEM) and X-ray diffraction (XRD). The presence of thick oxide films، which may significantly reduce the rate of diffusion، was not found. The kinetics of intermetallic layer growth largely coincides with data from other authors. Nevertheless، some differences were found. In spite of the large annealing time (up to 100 h) the complete dissolution of 1-mm thick aluminum plates was not reached. The results of tension tests and impact strength tests are briefly discussed.،
لینک های مرتبط :
 
لبخندناراحتچشمک
نیشخندبغلسوال
قلبخجالتزبان
ماچتعجبعصبانی
عینکشیطانگریه
خندهقهقههخداحافظ
سبزقهرهورا
دستگلتفکر


آمار وبلاگ
  • کل بازدید :
  • بازدید امروز :
  • بازدید دیروز :
  • بازدید این ماه :
  • بازدید ماه قبل :
  • تعداد نویسندگان :
  • تعداد کل پست ها :
  • آخرین بازدید :
  • آخرین بروز رسانی :